Really Good Bong | Short Slim Collection
121mm slim base, 85mm short beaker. Really comfy with minimal profile. Try out the config selector to render each design, it's sick.
What You Get
This is the Short Slim pack | 121mm slim base with 85mm short beaker taper. These are honestly really comfy bongs with a minimal profile. The slim base keeps it lightweight and portable, while the compact water chamber gives you faster clearing. Research team preferred these with 14.4mm bowls for the optimal experience.
The carb hole is positioned on the neck | during testing, fingers kept getting wet when trying to clear as much smoke as fast as possible. Neck placement solved that. Heights from 280-400mm range from pocket-friendly to comfortable desktop use.
The collection includes 12 complete bong designs spanning three heights (280mm, 340mm, 400mm) with smooth and ribbed neck textures (torus-style ribs provide grip without sharp edges), each with carb and no-carb variants.
Plus 12 matching downstems | recommended stems for each height in 14mm and 18mm variants, with diffuser and plain options. Extra pipe lengths (90mm, 100mm, 110mm) included for experimentation.
Technical Specifications
| Base Diameter | 121mm (slim profile) |
| Beaker Height | 85mm (short taper) |
| Total Heights | 280mm | 340mm | 400mm |
| Neck Diameter | 50mm (280mm) | 51mm (340mm, 400mm) |
| Joint Size | 18.8mm female (standard ground taper) |
| Carb Placement | 10mm below neck top (on neck section) |
| Carb Size | 9mm diameter |
| Wall Thickness | 3mm structural |
| Files Included | 12 bongs + 12 downstems (24 STL files) |
Print Settings
Tested extensively on Bambu Lab H2S with PETG and ABS. These settings work reliably:
- Material: PETG recommended (heavily tested for quality assurance)
- Layer Height: 0.24mm
- Nozzle: 0.4mm (0.42mm line width)
- Infill: 15% standard (can go as low as 5%)
- Walls: 2 loops minimum, 3 recommended for beaker section
- Supports: Not required
- Print Time: 7-11 hours per bong depending on height
Critical Setting | Solid Base
First 25 layers (for 0.24mm layer height) should be 100% infill. This ensures watertight seal for years, prevents leaks at high-pressure beaker base, and ensures print stability.
Glass Compatibility
The bong is designed to fit standard 18.8mm glass downstems. Printed downstems fit glass bases. Standard 18.8mm ground glass taper throughout.
Get This Collection
Choose your platform. Same files, same quality.